Funmat HT Enhanced

$7,499.00

PRINT PEEK & ULTEM™

STRAIGHT OUT OF THE BOX


The Intamsys Funmat HT Enhanced is designed specifically to 3D print high-performance functional materials like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics.


Users can achieve 50-micron, high-resolution, industrial-quality 3D printing with the Intamsys Funmat HT.

Filament Absent Warning

When filament is getting low, a sensor triggers an alarm, and allows you to add new material. Never worry about low filament again!

Battery Backup

Power surges and failures? The Funmat HT has it's own battery backup to pause prints, and resume when the power returns. Essential when you're running important projects, or expensive filaments.

Auto Bed Leveling

Bed leveling is easier than ever, with a new 3-point automatic leveling system. You can also manually level as before, if needed.

Accurate to 12.5 Microns

Cutting-edge motors and drivers enable extremely high precision, resulting in incredible print quality, up to 12.5 microns

Pre-Configured Slicer from INTAMSYS

Printer profiles are pre-configured in the INTAMSUITE software for easy operation, straight out of the box

Compatible with Industry-Standard Slicing Software

Not feeling INTAMSUITE? You can also use the latest Cura, Simplify3D, Slic3r, and other toolpath generators (recommended)

Detailed Specifications:

Printing Technology

Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)

Build Volume

260 x 260 x 260mm

10.2" x 10.2" x 10.2"

Build Platform Material

Carbon Fiber Platform

Silicone Heater

Ceramic Glass

Build Plate Leveling
3-Point Automatic Leveling, Manual Leveling

Layer Resolution

0.05-0.3mm, 50 Micron

100-200 Micron Standard

Speeds

Movement: 300mm/s

Printing: Avg ~100mm/s

Filament Diameter

Standard 1.75mm Filament

Open Material System

Nozzle Diameter

Universal M6x1 Threading

0.1, 0.25, 0.4, 0.6, 0.8 and more

Position Accuracy

12.5 Microns X/Y
50 Microns (minimium layer height)

Firmware

Marlin Fork from 2017


Extruder Style

Direct Drive

Extruder Temperature

High-Temp 450°C (842°F)

Normal-Temp 280°C (536°F)

Build Plate Temperature

160°C (320°F)

Chamber Temperature

90°C (320°F)

Input File Type

Standard G-code, Marlin based

Power Consumption

1200W, 110V, 10A breaker minimum. We run two Funmat HT's at full heat on a single 20A breaker.

Machine Dimensions

D 19.25" W 21" H 26"

Allow 12" on right side and top, for bay doors to open

Shipping Weight & Dimensions

165lbs, 75kg
35"x26"x31" Dimensions
Ships on mini-pallet

Materials

Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System

Warranty

One Year Manufacturers Warranty, except on consumables